Roland HP-307 - Manual (Page 56)

58
Various Settings
When you press the damper pedal during Dual play or Split play, the
pedal effect is normally applied to both tones, but you can also
select the tone to which the effect is to be applied.
When you turn on the power, the left pedal functions as the soft
pedal, and the center pedal functions as the sostenuto pedal (p. 20).
You can change the function of the pedal to a variety of other
operations.
* “Layer” and “Octave” cannot be specified simultaneously for the
center and left pedals.
This lets you specify whether lyrics will be displayed in the screen
when you play back song data that contains lyrics.
This is set to “On” at the factory.
The HP307 may be unable to correctly recognize the type of CD
being used. In such instances, you can specify the type of CD
manually.
* Note that some commercial player piano CDs cannot be played back
on the HP307.
You can change the language that is displayed in the screen.
Pedal Settings
Changing How the Pedal Effects Are
Applied (Damper Pedal Part)
Setting Description
Right & Left All enabled
Right
Applied only to the Tone 1 (in dual mode)/Right-hand
Tone (in split mode)
Left
Applied only to the Tone 2 (in dual mode)/Left-hand
Tone (in split mode)
Changing How the Pedals Work
(Center/Left Pedal Func)
Setting Description
Soft
Sets function to soft pedal.
* Selectable only for the left pedal.
Sostenuto
Sets function to sostenuto pedal.
* Selectable only for the center pedal.
Play/Stop
The pedal will have the same function as the [ ]
button.
Layer
Pressing the pedal will layer on Tone 2, used for Dual
play.
* The Layer function can be applied only when using
Dual play.
Octave
Pressing the pedal will layer on a sound one octave
higher.
* The Octave function cannot be applied while using
Twin Piano, Dual play, or Split play.
Switching On/Off the Display of
Lyrics (Lyrics)
Setting Description
On Lyrics will be displayed.
Off Lyrics will not be displayed.
Setting the Type of CD To be
Played Back (CD/Audio Type)
Setting Description
Auto The CD type is detected automatically
Type A
General CDs for Player Piano contain audio and MIDI
data, and the data format may vary from one CD to
the next. If the CD’s data format does not match the
HP307’s settings, a “beep” will sound. Certain
general Piano player CDs may not be playable on
the HP307.
Type B
Stereo
Commercial Audio CD
(CDs other than those designed for use with the
player piano)
Changing the Language Displayed
in the Screen (Language)
Setting
English, Japanese
HP307_e1.book 58 ページ ２０１０年１月４日 月曜日 午後５時３９分