Roland HP-307 - Manual (Page 12)

14
Before You Play
Connecting the Speaker Cable
Plug the speaker cable extending from the stand into the
SPEAKER connector located at the rear of the HP307’s
bottom panel. Pay attention to the shape of the speaker
cable’s connector, and insert it until you hear it click securely
into place.
Connecting the Pedal Cord
Plug the pedal cord extending from the stand into the Pedal
connector located at the rear of the HP307’s bottom panel.
Connecting the Power Cord
Check before you connect the power cord.
• Make sure that the [Power] switch is off (p. 16).
• Make sure that the [Volume] slider is minimized (p. 17).
1. Connect the included power cord to the AC Inlet
located at the rear of the bottom panel.
2. Plug the other end of the power cord into an AC
outlet.
You must use the power cord included with the HP307.
Getting Ready to Play
Speaker cable
Speaker terminal
Pedal connector
Pedal cord
AC Inlet
Power cord
To AC Outlet
HP307_e1.book 14 ページ ２０１０年１月４日 月曜日 午後５時３９分