Radio Shack TAD-728 - Manual (Page 17)

17
TELEPHONE OPERATION
MAKING AND RECEIVING
CALLS
To make a call, lift the handset and
press
TALK . TALK and the call’s
elapsed time ( 0:01 ) appear on the
handset display, and the call’s elapsed
time starts to count. When you hear the
dial tone, dial the number. The number
displays as you dial.
To answer a call, lift the handset from
the base and press
TALK . If auto talk is
on, simply lift the handset from the base
to answer the call. If the handset is away
from the base, press any key to answer
the call.
To end a call, place the handset on the
base or press
TALK .
OUT-OF-RANGE SIGNAL
If you move the handset out of the
base's range while a call is in progress,
three beeps sound through the earpiece
every four seconds. Return to within the
base's range within 40 seconds, then
the out-of-range signal stops, and you
can resume your phone conversation.
If you keep the handset out of the base's
range for 40 seconds or more, the call is
disconnected.
ADJUSTING THE
HANDSET VOLUME
The handset's VOLUME control lets you
set the volume you hear through the
handset to one of four levels.
To change the volume setting during a
call, repeatedly press
VOLUME or
on the handset. The TAD-728 beeps
once each time you press
VOLUME
or and shows the volume level as
Maximum , High , Medium , or Low on
the handset display. When you reach
the highest or lowest volume level, the
TAD-728 beeps three times.
USING REDIAL
You can quickly dial the last number di-
aled. Lift the handset and press
TALK ,
then press REDIAL .
Notes:
• The redial memory holds up to 32 dig-
its, so you can redial long-distance as
well as local numbers.
43-728.fm Page 17 Thursday, August 26, 1999 8:53 AM