Security host/guest, User name to send, Password to send – RAD Data comm 4-Wire Symmetrical VDSL Modem ASM-60 User Manual
Page 72: User name to accept, Password to accept
Appendix C IR-IP Interface Module
ASM-60 Installation and Operation Manual
C-18
Advanced Setup Menu
Security Host/Guest
This option can be used to configure the IP router either as a guest unit, to be
authenticated by another router, or as a host unit, that authenticates other routers.
User Name To Send
The name by which an IP router card configured as guest identifies itself.
Password To Send
The password by which an IP router card configured as guest identifies itself.
User Name To Accept
The user name to be accepted by an IP router configured as host, when an
incoming connection request is received.
Password To Accept
The user password to be accepted by an IP router configured as host, when an
incoming connection request is received.
A typical PPP Protocol Parameters menu is shown in
IR_IP
S/W Ver. 1.00 31/IR (date)
Quick Setup
Management Access
Advanced Setup
.....................................................................
Device
identification
Interface
Parameters
Protocol
Parameters
=====================================================================
1. Header and Control Field Compression
:[ No ]
2. Protocol Field Compression:
:[ No ]
3. Authentication Protocol
:[ NONE/NONE ]
4. Security Host / Guest
:[ Guest ]
5. User Name To Send
:.................
6. Password To Send
:.................
7. User Name To Accept :.................
8. Password To Accept
:.................
Press one of the numbers to select or ESC:
Figure C-13. PPP Protocol Parameters Menu