RAD Data comm 4-Wire Symmetrical VDSL Modem ASM-60 - Manual (Page 31)

Front Panel Indicators 3-1
Chapter 3
Operation
This chapter provides the description of the ASM-60 front-panel indicators, and
details the modem's operating procedures (turn-on, front-panel indications,
performance monitoring and turn-off).
Installation procedures given in
Chapter 2 must be completed and checked before
attempting to operate ASM-60.
3.1 Front Panel Indicators
The front panel of ASM-60 includes nine LED indicators that show the current
operating status of the unit. ASM-60 also includes a proprietary 9-pin connector
(CONTROL DCE) on its front panel for connection to a terminal.
Figure 3-1 shows the ASM-60 front panel . Table 3-1 lists and describes the ASM-60
indicators.
Figure 3-1 ASM-60 Front Panel
Table 3-1. LED Indicators
Name Function
PWR (green) ON – Power is ON
RTS (yellow) ON – DTE activates Request To Send
DCD (yellow) ON– Link A, link B and internal IMUX are synchronized
ALM (red) ON – An alarm enters the alarm buffer
TD (yellow) ON – Data is being transmitted to the DTE
OFF – Steady mark is being transmitted
RD (yellow) ON – Data is being received from the DTE
OFF – Steady mark is being received
TST (red) Reserved for future use