Application, Technical specifications, Physical description – RAD Data comm 4-Wire Symmetrical VDSL Modem ASM-60 User Manual
Page 56: C.2 technical specifications, C.3 physical description
Appendix C IR-IP Interface Module
ASM-60 Installation and Operation Manual
C-2 Physical
Description
Application
shows a typical application of the ASM-60 modem equipped with the
IR-IP interface module.
ASM-60
with V.35 Interface
Router
ASM-60
with IR-IP
Figure C-1. Typical Application of ASM-60 with IR-IP
C.2 Technical Specifications
Router
LAN IP Net
Up to 256 hosts on LAN IP net
Filtering and
Forwarding
30 kbps/35 kbps
Buffer
256 frames (maximum size – 1534 bytes)
Delay
1 frame
LAN
Standard
Conforms to IEEE 802.3/Ethernet v2
Data Rate
10 Mbps
(20 Mbps 10BaseT in full duplex topology)
Connector
10BaseT (UTP): Shielded RJ-45
WAN
Protocols
• PPP (PAP/CHAP)
• Frame Relay (RFC 1490)
• HDLC
C.3 Physical Description
shows the rear panel of ASM-60 with the IR-IP interface module.
: FOR CONTINUED
TYPE AND RATING OF FUSE.
FIRE, REPLACE ONLY WITH SAME
PROTECTION AGAINST RISK OF
CAUTION
10BASE-T
IR-IP
INT
ACT
ERR
A-1 2
4 5-B
LINE
Figure C-2. Rear Panel of ASM-60 with the IR-IP Module