Nikon NP64 - Manual (Page 84)

75
6. Using On-Screen Menu
❼ Menu Descriptions & Functions [INFO.]
Displays the status of the current signal and lamp usage. This item has three pages. The information included is
as follows:
TIP: Pressing the HELP button on the remote control will show the [INFO.] menu items.
[USAGE TIME]
[LAMP LIFE REMAINING] (%)*
[LAMP HOURS USED] (H)
[TOTAL CARBON SAVINGS] (kg-CO2)
* The progress indicator shows the percentage of remaining bulb life.
The value informs you of the amount of lamp usage. When the remaining lamp time reaches 0, the LAMP LIFE
REMAINING bar indicator changes from 0% to 100 Hours and starts counting down.
If the remaining lamp time reaches 0 hours, the projector will not turn on regardless of whether the ECO
MODE is set to OFF or ON.
• The message to the effect that the lamp should be replaced will be displayed for one minute when the projec-
tor is turned on and when the POWER button on the projector or the remote control is pressed.
To dismiss this message, press any button on the projector or the remote control.
Product
Lamp life(H)
Replacement lamp ECO MODE
OFF ON
NP64/NP63
2500 3500
NP09LP
NP54/NP43 NP08LP