Using on-screen menu, 1) using the menus, Using the menus – Nikon NP64 User Manual

Page 61

6. Using On-Screen Menu

❶

Using the Menus

1. Press the MENU button on the remote control or the projector cabinet to display the menu.

NOTE: The commands such as ENTER, EXIT, ,  in the bottom show available buttons for your operation.

2. Press the  buttons on the remote control or the projector cabinet to display the submenu.

3. Press the ENTER button on the remote control or the projector cabinet to highlight the top item or the

first tab.

4. Use the  buttons on the remote control or the projector cabinet to select the item you want to adjust

or set.

You can use the  buttons on the remote control or the projector cabinet to select the tab you want.

5. Press the ENTER button on the remote control or the projector cabinet to display the submenu window.

6. Adjust the level or turn the selected item on or off by using the  buttons on the remote control or

the projector cabinet.

Changes are stored until adjusted again.

7. Repeat steps 2 -6 to adjust an additional item, or press the EXIT button on the remote control or the pro-

jector cabinet to quit the menu display.

NOTE: When a menu or message is displayed, several lines of information may be lost, depending on the signal or settings.

8. Press the MENU button to close the menu.
To return to the previous menu, press the EXIT button.