Nikon NP64 - Manual (Page 40)

31
4. Convenient Features
 Changing Eco Mode
This feature enables you to select two brightness modes of the lamp:
OFF and ON modes. The lamp life can be extended by turning on the [ECO MODE].
[ECO MODE] Description Status of LAMP indicator
[OFF] This is the default setting (100% Brightness). Off
STATUS
LAMP
[ON] Select this mode to increase the lamp life (NP64/
NP63: approx. 75% Brightness, NP54/NP43: ap-
prox. 85% Brightness) Steady Green light
STATUS
LAMP
ON OFF
AUTO ADJ.
COMPUTER
VIDEO S-VIDEO VIEWER
ID SET CLEAR
AV-MUTE FREEZE
ENTER
EXIT
ECO MODEKEYSTONEPICTURE
VOL. HELP FOCUS ASPECT
1 2 3
4 5 6
7 8 9
0
MENU
ZOOM
L - CLICK R - CLICK
MOUSE
PA
GE
M
AG
NIF
Y
POWER
To turn on the [ECO MODE], do the following:
1. Press the ECO MODE button on the remote control to display
[ECO MODE] screen.
2. Use the  or  button to select [ON].
3. Press the ENTER button.
To change from [ON] to [OFF], Go back to Step 2 and select [OFF].
Repeat Step 3.
NOTE:
• The [ECO MODE] can be changed by using the menu.
Select [SETUP] → [GENERAL] → [ECO MODE].
• The lamp life remaining and lamp hours used can be checked in [USAGE
TIME]. Select [INFO.] →[USAGE TIME].
• The projector will always enter into the [ECO MODE] [OFF] condition for 60
seconds immediately after the projector is turned on. The lamp condition will
not be affected even when [ECO MODE] is changed within this time period.
• After a lapse of 60 seconds from when the projector displays a blue, black or
logo screen, [ECO MODE] will automatically switch to [ON]. This is done only
when [ECO MODE] is set to [OFF].
• If the projector is overheated in [OFF] mode, there may be a case where the
[ECO MODE] automatically changes to [ON] mode to protect the projector.
When the projector is in [ON] mode, the picture brightness decreases. When
the projector comes back to normal temperature, the [ECO MODE] returns to
[OFF] mode.
Thermometer symbol [ ] indicates the [ECO MODE] is automatically set to
[ON] mode because the internal temperature is too high.