Nikon NP64 - Manual (Page 11)

2
1. Introduction
➋ Introduction to the Projector
This section introduces you to your new projector and describes the features and controls.
Congratulations on Your Purchase of the Projector
This DLP™ projector is one of the very best projectors available today. The projector enables you to project pre-
cise images up to 300 inches (measured diagonally) from your PC or Macintosh computer (desktop or notebook),
VCR, DVD player or document camera.
You can use the projector on a tabletop or cart, you can use the projector to project images from behind the
screen, and the projector can be permanently mounted on a ceiling*
1 . The remote control can be used wirelessly.
* 1 Do not attempt to mount the projector on a ceiling yourself.
The projector must be installed by qualified technicians in order to ensure proper operation and reduce the
risk of bodily injury.
In addition, the ceiling must be strong enough to support the projector and the installation must be in accor-
dance with any local building codes. Please consult your dealer for more information.
Features you’ll enjoy:
• Compact and high-bright DLP Projector
The light-weight DLP projector delivers high-brightness with a built-in 0.3W monaural speaker.
• A mechanical sliding lens cover
The projector has a mechanical sliding lens cover.
Closing the lens cover will turn off the image and sound during normal projector operation.
• Carbon Meter
This feature will show energy-saving effect in terms of CO2 emission reduction (kg) when the projector’s [ECO
MODE] is set to [ON].
The amount of CO2 emission reduction will be displayed in the confirmation message at the time of power-off
and in the INFO page of the on-screen menu.
• AUTO FOCUS function
When you turn on the power, change the zoom or reposition the projector, the AUTO FOCUS function will work
instantly.
The focus sensor on the projector detects the distance to the screen and automatically adjusts the focus of an
image as well as reducing the required set-up time.
• Auto vertical keystone correction
Auto Keystone feature allows the projector to detect its tilt and correct vertical distortion automatically.
• Direct Power Off
The projector has a feature called “Direct Power Off”. This feature allows the projector to be turned off (even
when projecting an image) by disconnecting the AC power supply.
To turn off the AC power supply when the projector is powered on, use a power strip equipped with a switch
and a breaker.
• AUTO POWER ON and AUTO POWER OFF features
The AUTO POWER ON(AC), AUTO POWER ON(COMP.), AUTO POWER OFF, and OFF TIMER features elimi-
nate the need to always use the POWER button on the remote control or projector cabinet.
• The supplied remote control allows you to assign a CONTROL ID to the projector
Multiple projectors can be operated separately and independently with the same single remote control by as-
signing an ID number to each projector.
• WALL COLOR Correction
Built-in WALL COLOR Correction presets provide for adaptive color correction when projecting onto non-white
screen material