National Instruments NI 6014 - Manual (Page 106)

Index
© National Instruments Corporation I-5 NI 6013/6014 User Manual
National Instruments ADE software,
1-3 to 1-4
NI-DAQ driver software, 1-2 to 1-3
unpacking, 1-4
NI-DAQ driver software
correspondence of signal names in
LabVIEW and NI-DAQ (table), C-7
overview, 1-2 to 1-3
questions about, C-2
noise, environmental, 4-40 to 4-41
NRSE (nonreferenced single-ended) mode
description (table), 3-2
differential connections, 4-12 to 4-13
recommended input configuration
(figure), 4-9
single-ended connections for
ground-referenced signal sources,
4-15 to 4-16
O
optional equipment, 1-4
P
PCI Local Bus Specification Revision 2.3, 2-2
PFI0/TRIG1 signal
description (table), 4-4
I/O signal summary (table), 4-6
PFI1/TRIG2 signal
description (table), 4-4
I/O signal summary (table), 4-6
PFI2/CONVERT* signal
description (table), 4-4
I/O signal summary (table), 4-6
PFI3/GPCTR1_SOURCE signal
description (table), 4-4
I/O signal summary (table), 4-6
PFI4/GPCTR1_GATE signal
description (table), 4-4
I/O signal summary (table), 4-6
PFI5/UPDATE signal
description (table), 4-4
I/O signal summary (table), 4-6
PFI6/WFTRIG signal
description (table), 4-4
I/O signal summary (table), 4-6
PFI7/STARTSCAN signal
description (table), 4-4
I/O signal summary (table), 4-6
PFI8/GPCTR0_SOURCE signal
description (table), 4-5
I/O signal summary (table), 4-6
PFI9/GPCTR0_GATE signal
description (table), 4-5
I/O signal summary (table), 4-6
PFIs (programmable function inputs)
questions about, C-6 to C-7
signal routing, 3-6
timing connections, 4-20 to 4-21
PGIA (programmable gain instrumentation
amplifier)
analog input modes, 4-7 to 4-8
differential connections
ground-referenced signal sources
(figure), 4-11
nonreferenced or floating signal
sources, 4-12 to 4-13
overview, 4-11
single-ended connections
floating signal sources (figure), 4-15
ground-referenced signal sources
(figure), 4-16
physical specifications, A-8
pin assignments. See I/O connectors.
posttriggered data acquisition
overview, 4-21
typical acquisition (figure), 4-21
power connections, 4-19
power requirement specifications, A-8
power-on states of PFI and DIO lines, C-7