National Instruments NI VXIpc-882 - Manual (Page 46)

Chapter 3 Configuration and Default Settings
© National Instruments Corporation 3-25 NI VXIpc-882 User Manual
PCI-MXI-2 Default Settings
This section summarizes the software default settings for the PCI-MXI-2.
This information is included for your convenience in case you have any of
these modules in your system.
Advanced: Bus Arbitration:
Enable Arbiter Timeout Checked
Advanced: Bus Arbitration:
Request Level 3
Table 3-17. PCI-MXI-2 General Tab Default Settings
Setting Default Value
Common Board Configurations Current Board Configuration
Table 3-18. PCI-MXI-2 Device Tab Default Settings
Setting Default Value
Logical Address 0
Device Class Message Based
Interrupt Configuration: Number of Handlers 1
Table 3-19. PCI-MXI-2 Shared Memory Tab Default Settings
Setting Default Value
Share Memory in A32 Space Selected
Shared Memory: Shared RAM Size 2 GB
Shared Memory: Reserve Physical
Memory (KB) 0
Table 3-16. VXI-MXI-2 VXI Bus Tab Default Settings (Continued)
Setting Default Value