National Instruments NI VXIpc-882 - Manual (Page 45)

Chapter 3 Configuration and Default Settings
NI VXIpc-882 User Manual 3-24 ni.com
Shared Memory: Requested
Memory 16 KB
Operate in Interlocked Mode Checked
Table 3-15. VXI-MXI-2 MXI-2 Bus Tab Default Settings
Setting Default Value
Bus Settings: Bus Timeout 1 ms
System Controller Auto Detect
Advanced: Bus Protocols:
MXI Transfer Limit Unlimited
Advanced: Bus Protocols:
Perform Parity Checking Checked
Advanced: MXI-2 CLK 10 Signal Receive
Table 3-16. VXI-MXI-2 VXI Bus Tab Default Settings
Setting Default Value
Bus Settings: Bus Timeout 125 μs
Bus Requester: Release on
Request Checked
Slot 0 Configuration: Auto-Detect
(Recommended) Checked
Advanced: Bus Protocols:
Transfer Limit 256
Advanced: Bus Arbitration:
Arbiter Type: Priority Checked
Advanced: Bus Arbitration:
Operate as Fair Requester Checked
Table 3-14. VXI-MXI-2 Device Tab Default Settings (Continued)
Setting Default Value