National Instruments NI VXIpc-882 - Manual (Page 41)

Chapter 3 Configuration and Default Settings
NI VXIpc-882 User Manual 3-20 ni.com
Figure 3-10. Clearing the CMOS Contents
Software Configuration
Measurement and Automation Explorer (MAX)
Measurement and Automation Explorer (MAX) is the utility for
configuring most National Instruments hardware and software. You can
use this utility to configure your NI VXIpc-882 controller’s various
software and hardware features.
The following sections describe hardware configuration settings available
with NI-VXI 3.6. If you are using a later version of NI-VXI, you may find
some differences between your settings and those described in this section.
1 Normal Operation (Default) 2 Clear CMOS Contents 3 Pin 1
1 2
3