Nokia 3650 - Manual (Page 58)

Copyright © 2004 Nokia. All rights reserved.
Contacts
58
Assigning speed dialling keys
Speed dialling is a quick way to call frequently used numbers. You can assign speed
dialling keys to eight phone numbers. Number 1 is reserved for the voice mailbox.
1 Open the contact card for which you want a speed dialling key and select Options →
Assign speed dial . The speed dialling grid opens, showing you the numbers from 1-9.
See Fig. 3 , p. 58 .
2 Scroll to a number and press Assign . When you return to the contact information
view, you can see the speed dial icon next to the number. See Fig. 2 , p. 54 .
• To call the contact by speed dialling, go to standby mode and press the speed dialling
key and .
Adding a ringing tone for a contact card or group
You can set a ringing tone for each contact card and group. When that contact or group
member calls you, the phone plays the chosen ringing tone (if the caller’s telephone
number is sent with the call and your phone recognises it).
1 Press to open a contact card or go to the Groups list and select a contact group.
2 Select Options → Ringing tone . A list of ringing tones opens.
Tip! To listen to a
ringing tone, go to
Recorder.
3 Use the scroll key to select the ringing tone you wish to use for the contact or group
and press Select .
• To remove the ringing tone, select Default tone from the list of ringing tones.
Note: For an individual contact, the phone will always use the ringing tone that
was assigned last. So, if you first change a group ringing tone and then the ringing
tone of a single contact that belongs to that group, the ringing tone of the single
contact will be used when the contact calls you the next time.
Fig. 3 The speed dialling
grid