Settings – Nokia 3650 User Manual

Page 43

Settings

Tip! When you are

writing, press

to open

the special characters
table. Press

to enter a

space.

•

Prompt password

- If you must key in a new password every time you log on to a server,

or if you do not want to save your password to the phone, choose

Yes

•

Password

- A password may be needed to make a data connection, and is usually

provided by the service provider. The password is often case-sensitive. When you are
writing the password, the characters you enter are shown briefly and then changed
to asterisks (*). The easiest way to enter numbers is to press

and

select

Insert

number

and then continue entering letters.

•

Authentication

Normal

Secure

•

Gateway IP address

- The IP address that the required browser gateway uses.

•

Homepage

- Depending on what you are setting up, write either:

• the service address, or
• the address of the multimedia messaging centre.

Glossary: ISDN

connections are a way to
establish a data call
between your phone and
your access point. ISDN
connections are digital
from end to end and as
such offer quicker set-up
times and faster data rates
than analogue
connections. In order to
use an ISDN connection,
both your Internet service
provider and network
operator must support it.

•

Connection security

- Choose whether Transport Layer Security (TLS) is used for the

connection. Follow the instructions given to you by your service provider.

•

Session mode

Permanent

Temporary

•

Data call type

(for GSM data and high speed data only) -

Analogue

ISDN v.110

, or

ISDN

v.120

defines whether the phone uses an analogue or digital connection. This setting

depends on both your GSM network operator and Internet Service Provider (ISP),
because some GSM networks do not support certain types of ISDN connections. For
details, contact your ISP. If ISDN connections are available, they establish connections
more quickly than analogue methods.

•

Maximum data speed

(for GSM data and high speed data only) - The options are

Automatic

/ 9600 / 14400 / 19200 / 28800 / 38400 / 43200, depending on what you

have chosen in

Session mode

and

Data call type

. This option allows you to limit the

maximum connection speed when high speed data is used. Higher data rates may cost
more, depending on the network service provider.

Note: The speeds above represent the maximum speed at which your
connection will operate. During the connection, the operating speed may be
less, depending on network conditions.