Nextel comm I760 - Manual (Page 148)

138
Datebook
Press A under Browse to choose from common
event names. -or-
Enter a phone number, Direct Connect number,
or Talkgroup number. After the event is stored,
you can call this number.
When you are finished, press O .
3 If you want to assign a location to the event:
Select Location.
Enter the location. -or-
Enter a phone number, Direct Connect number,
or Talkgroup number. After the event is stored,
you can call this number.
When you are finished, press O .
4 The start time automatically assigned to an
event is the beginning of the day. If you want to
change the start time or assign no start time:
Select Start.
Enter the start time you want. -or-
Press A under No Time to assign no start time.
5 If you want to assign a duration to the event:
Select Duration.
Select the duration you want. -or-
Select Custom to enter a duration.
6 The date automatically assigned to an event is
the date that was highlighted or selected when
you began creating the event.
To change the date of the event:
Select Date.
Enter the date you want.
7 If you want to make the event a recurring event:
Select Repeat.
Select the repeat cycle you want.
If the event occurs more than once a week:
Select Multiple Day. Select the days you want.
Press A under Done.
Select End. Select the date you want this event
to stop recurring.
8 If you want to create a reminder for this event:
Select Reminder.
Select the reminder time you want. -or-
Select Custom to enter a reminder time.
Note: If an event has no start time, you cannot
create a reminder for it.
9 If you have entered all the information you want
for this event, press A under Done. -or-