Activating the silent charging feature – Nortel Networks Nortel 4075 User Manual
Page 207
Telephone settings
207
Activating the Silent charging feature
Activate the Silent charging feature if you do not want the handset to ring
or vibrate while in the charger. Operation returns to normal when you lift
the handset from the charger.
To activate the Silent charging feature, perform the following steps:
4. Press the
Up
or
Down
key to highlight the
Prealarm time
option.
5. Press the
Select
soft key.
6. Press the
Up
or
Down
key to select the required
option:
— off - to disable the prealarm.
— 5s
— ...
— 240s - to define a delay period in seconds.
7. Press the
Select
soft key to apply the changes.
8. Press the
Clr
key one or more times to return to the
idle display.
CAUTION
If you configure your handset to use Silent charging, any
Alarms you configure cannot provide an audible alert
while the handset is on the charger.
1. Open the
Calls
menu using the steps in
the call settings menu” (page 188)
Prealarm time
Select
Select