Nortel Networks Nortel 4075 - Manual (Page 187)

Telephone settings
187
Call settings
You can change the call settings for your handset.
Use the handset Settings menu to perform the following:
• “Accessing the call settings menu” (page 188)
2. Press the Up or Down key to highlight the Power
save option.
3. Press the Select soft key.
4. Use the Dialpad to enter the time period:
— the first value (from 1 to 59 seconds) defines
the time before the display becomes dim.
— the second value (from 1 to 59 seconds)
defines the time before the display switches off
(after the display becomes dim). If you
configure the second value as 0, the display
never switches off and the handset battery
discharges faster.
Attention: To conserve the battery charge of your
handset, the display automatically dims during
calls. Press the
OK key to restore the display.
To configure the number of seconds that elapse
before the display dims, change the “first value”
timer in Power save settings. For more information,
see
Configuring power save (p. 186) .
5. Press the Save soft key.
6. Press the Clr key one or more times to return to the
idle display.
Power save
Select
Save