NAD Classic 515 - Manual (Page 6)

– Selecting a track to start play with.
– Fast search to a particular passage during play.
– Selecting the recording mode when making a
tape recording.
– Selecting the recording time when making a tape
recording.
4. REVIEW
Checking a programme.
5. EDIT
Activates the EDIT function when making a tape
recording which determines program playing time to
suit selected tape length.
6. PROGRAM
Opening the memory when compiling a pro-
gramme.
7. PLAY/PAUSE
– Starting play (PLAY).
– Interrupting play (PAUSE).
8. NEXT DISC
– Selecting another CD during play.
– Selecting a CD to start play with.
– Selecting CDs when compiling a programme.
9. SKIP
– Selecting another track during play.
– Selecting a track to start play with.
– Selecting tracks when compiling a programme.
– Selecting the recording mode when making a
tape recording.
- Selecting the recording time when making a tape
recording.
10. SCAN
Fast search to a particular passage during play.
The life of the batteries of the remote control is
around one year. For replacement only use batteries
of the type RO3, UM4 or AAA.
FUNCTIONAL OVERVIEW
DISPLAY
– Lights up when the changer receives a com-
mand from the remote control.
1 - 5 CD NUMBER INDICATOR
– Lights up when you switch the changer on.
– Indicates the number of CDs in the CD compart-
ment.
– Indicates what CD is being played (CD number
flashes).
PROGRAM
– Flashes when a programme is being compiled.
– Lights up when a programme is being played.
TRACK
- Indicates what track is being played;
– Indicates the number of tracks on a CD or in a
programme.
TRACK TIME
– Indicates the elapsed playing time of the track
being played.
REM(aining) TRACK TIME – Indicates the remain-
ing playing time of the track being played.
TOT(al) REM(aining) TIME – Indicates the remain-
ing playing time of a CD.
TOT(al) TIME – Indicates the total playing time of a
CD.
SHUFFLE – Lights up when the tracks are played
in random order.
PAUSE – Lights up when play is interrupted.
REPEAT 1 – Lights up when you repeat a track.
REPEAT DISC – Lights up when you repeat a CD.
REPEAT – Lights up when you repeat all CDs or a
programme from them.
Display messages:
READ – Lights up when a CD’s contents list is
being scanned.
NO DISC– Lights up when there are no CDs in the
CD compartment.NO AUDIO DISC– Lights up when
insert a non audio CD (CD-ROM, CD-I or CDV).
WRONG TRACK– Lights up when you select a
non-existent track number.
WRONG DISC– Lights up when you select a non-
existent CD number.
SELECT DISC– Lights up when you try to activate
a function for which you must first select a CD num-
ber.
INSERT DISC– Lights up when you give a play
command while the CD compartment is empty.
GO TO PLAY – Lights up if you try to activate a
function for which you must first start play.
GO TO STOP – Lights up if you try to activate a
function for which you must first stop play.
EDIT – Lights up when the player is put into the
EDIT mode.
PLAYBACK
INSERTING THE CDs
NOTE! Use only audio CDs; no CD-ROM, CD- I or
CDV.
• Press POWER ON/OFF 1 to switch the changer
on.
– The changer will now start CD detection to check
how many CDs there are in the CD compartment.
The turntable will rotate slowly until all positions (1 -
5) in the CD compartment have been checked.
– The position which is being checked is always
shown on the display (DISC X).
– After CD detection the 1-5 CD number indicator
will show the number of CDs in the CD compartment.
• Open the CD compartment by pressing OPEN (3).
NAD
6
GB