Nokia 5100 - Manual (Page 109)

[ 100 ]
TTY
You will need the following for TTY/TDD communication.
• A TTY/TDD device that is “cellular ready” or “cellular compatible”.
• A cable for connecting the TTY/TDD to your phone, usually supplied by
the manufacturer of the TTY/TDD device.
• The TTY/TDD adapter (HDA-10), which can be purchased as an
enhancement at
www.nokia.com/us . See “Accessories” on page 140
on pages 150–170. You can connect your phone to a TTY/TDD using
the Nokia TTY/TDD Adapter (HDA-10).
SETTING UP THE TTY PROFILE
In order for your phone to recognize the TTY/TDD, you will need to set up
the TTY/TDD profile.
Important: Some manufacturers of TTY/TDD devices suggest that
the phone be at least 18 inches from the TTY/TDD device. When
connecting to any other device, read its user guide or contact its
manufacturer for detailed instructions and safety information.
1 Plug the HDA-10 adapter into the connector on the bottom of
your phone.