Nokia 3205 - Manual (Page 59)

S e t t i n g s ( M e n u 4 )
Copyright © 2004 Nokia. All rights reserved. 59
If you selected On power-up or Lock
now , you must enter your lock code
before the phone will function
normally. Once the lock code has
been accepted, your phone functions
normally.
Important: Call not allowed
is displayed if you attempt to
place a call while phone is
locked.
To answer a call with phone lock on,
press
Answer or the Send key.
Allow numbers when phone
locked
When phone lock is on, the only
outgoing calls that can be made are
to the following numbers:
• The emergency number
programmed into your phone (for
example, 911).
• The number stored in the Allowed
no. when phone locked location.
1. At the standby screen, select
Menu > Settings > Security
settings > Access codes >
Allowed no. when phone locked
and press Select .
2. Enter the lock code and press OK .
(See “Change the lock code” on
page 59 .)
3. Enter the phone number or press
Search and recall the number
from the phone book, and press
OK .
Call the allowed phone number
1. At the standby screen, press the
Scroll up key or Scroll down key.
2. Press the Send key to place the
call.
Change the lock code
The default lock code is 1234 or
0000 or the last four digits of your
phone number. If you enter an
incorrect lock code five times in a
row, your phone will prompt you for
the security code.
1. At the standby screen, select
Menu > Settings > Security
settings > Access codes >
Change lock code and press
Select .
2. Enter the current (or default) lock
code and press OK .
3. Enter the new lock code and
press OK .
4. Reenter the new lock code for
verification and press OK .
Note: When you change your
lock code, make sure you
store it in a safe place, away
from your phone. Avoid
entering access codes similar
to emergency numbers to
prevent accidental
emergency calls.