Nokia 3205 - Manual (Page 53)

S e t t i n g s ( M e n u 4 )
Copyright © 2004 Nokia. All rights reserved. 53
DTMF tones are sent during an active
call. You can send them manually
from your phone’s keypad, or send
them automatically by saving them
in your phone.
Set type
1. At the standby screen, select
Menu > Settings > Phone
settings > DTMF tones > Manual
DTMF tones and press Select .
2. Select one of the following
options and press Select :
Continuous — the tone sounds
for as long as you press and hold
a key.
Fixed — Used to send tones of the
duration you specify in the DTMF
tone length option.
Off — Used to turn off tones. No
tones are sent when you press a
key.
Set fixed length
You can also specify DTMF tone
length when using the
Fixed option.
At the standby screen, select Menu
> Settings > Phone settings > DTMF
tones > DTMF tone length > Short
(0.1 seconds) or Long (0.5 seconds)
and press Select .
Create a welcome note
You can write a welcome note which
briefly appears on the display screen
whenever you switch your phone on.
Note: Predictive text input is
not available for entering
Welcome note text.
1. At the standby screen, select
Menu > Settings > Phone
settings > Welcome note and
press Select .
2. Enter a note (up to 44
characters).
Press the * key to display and
select from available special
characters.
3. When you are finished, press
Options > Save , and press Select .
Scroll to Delete and press Select
if you want to delete the previous
text and begin creating another
welcome note.
Confirm UIM service actions
If you select this option, the phone
will show confirmation messages
when you use UIM card services.
Please check with your service
provider for more details.
Choose a banner
Banner is a network service. See
”Network services” on page 9 for
more information.
If your wireless service provider
supports this feature, then you can
choose whether the display shows
the operator logo when the phone is
in the idle state.