Nokia 3205 - Manual (Page 50)

S e t t i n g s ( M e n u 4 )
50 Copyright © 2004 Nokia. All rights reserved.
■ Call settings
Anykey answer
Anykey answer allows you to answer
an incoming call by briefly pressing
any key except the power key, Right
selection key, or End key.
At the standby screen, select Menu
> Settings > Call settings > Anykey
answer and press Select > On or Off
and press Select .
Automatic redial
Occasionally, your network may
experience heavy traffic, resulting in
a “fast” busy signal when you dial.
With automatic redial activated,
your phone redials the number up to
10 times, and notifies you once the
network is available.
At the standby screen, select Menu
> Settings > Call settings >
Automatic redial > On or Off and
press Select .
Speed dialling
You can activate or deactivate speed
dialling. For more information, see
“Set up speed dialling” on page 28 .
Automatic update of service
This is a network dependent feature.
Please check with your service
provider for availability. Your phone
is capable of receiving updates to
wireless services sent to your phone
by your service provider.
At the standby screen, select Menu
> Settings > Call settings >
Automatic update of service > On
or Off and press Select .
Calling card
If you use a calling card for long
distance calls, you can save the
calling card numbers in your phone.
Your phone can store up to four
calling cards.
Save information
1. At the standby screen, select
Menu > Settings > Call settings
> Calling card and press Select .
2. Enter your security code and
press OK .
3. Scroll to one of the four memory
locations and press Options >
Edit > OK > Dialling sequence
and press Select .
4. Scroll to one of the following
sequence types and press Select :
Access no.+ phone no.+ card no.
— Dial access number, phone
number, then card number (+ PIN
if required)