Receive data or fax calls – Nokia 3205 User Manual
Page 51
S e t t i n g s ( M e n u 4 )
Copyright © 2004 Nokia. All rights reserved.
51
Access no.+ card no.+ phone no.
— Dial access number, card
number (+ PIN if required), then
phone number
Prefix+ phone no.+ card no.
—
Dial the prefix (numbers that
must precede the phone number)
and phone number you want to
dial, then card number (+ PIN if
required)
5. Enter the required information
(access number or prefix and card
number) and press
OK
to confirm
your entries.
6. Scroll to
Card name
and press
Select
.
7. Enter the card name and press
OK
.
Note: Contact your calling
card company for more
information.
Make calls
After you have saved your calling
card information in your phone, you
can make a call using your calling
card.
1. At the standby screen, select
Menu
>
Settings
>
Call settings
>
Calling card
and press
Select
.
2. Enter your security code and
press
OK
.)
3. Scroll to the calling card of your
choice, select
Options
>
Select
>
OK
.
4. Press the End key to return to the
standby screen; then enter the
phone number, including any
prefix (such as 0 or 1), that your
calling card may require when
you make a calling card call.
See your calling card for
instructions.
5. Press and hold the Send key for a
few seconds until
Card call
is
displayed.
6. When you hear the tone or
system message, press
OK
.
Receive data or fax calls
Data or fax calls is a network service.
See
for
more information.
If your wireless service provider
supports this feature, then you can
set up the phone to send or receive
data or fax calls when a terminal,
such as a PDA or PC, is connected.
For better performance during data
calls, place the phone on a
stationary surface with the keypad
facing downward. Do not move the
phone by holding it in your hand
during a data call.
Note: For more information
on connectivity, refer to the
PC/PDA Connectivity Guide.
The PC/PDA Connectivity
Guide can be downloaded
from the Nokia website at
http://www.nokia-asia.com.