Nilfisk-Advance America SR 1800S 2WD - Manual (Page 71)

USER MANUAL ENGLISH
SR 1800S D 2WD 33014097(2)2006-12 A 17
MAINTENANCE
The lifespan of the machine and its maximum operating safety are ensured by correct and regular maintenance.
The following table provides the scheduled maintenance. The intervals shown may vary according to particular working
conditions, which are to be defi ned by the person in charge of the maintenance.
WARNING!
Maintenance procedures must be performed when the machine is off (ignition key removed).
Moreover, read carefully the instructions in Safety chapter before performing any maintenance procedure.
NOTE
When performing maintenance procedures, use only original spare parts.
All scheduled or extraordinary maintenance procedures must be performed by qualifi ed personnel, or by an authorised Service
Center.
This Manual contains the Scheduled Maintenance Table and describes only the easiest and most common maintenance
procedures.
For other maintenance procedures contained in the Scheduled Maintenance Table or for extraordinary maintenance procedures
see the Service Manual that can be consulted at any Service Center.
SCHEDULED MAINTENANCE TABLE
Maintenance
Running-in period
(after the fi rst 50
hours)
Every 10 hours
or before use
Every
200
hours
Every
600
hours
Every
1,200
hours
Every
2,400
hours
Long
periods
Engine oil level check
Engine air fi lter cleaning
Engine radiator fi n cleaning
check
Engine coolant level check
Battery fl uid level check
Hydraulic system oil level and
drain fi lter effi ciency check
Hydraulic system oil cooler fi n
check and cleaning
Hopper cleaning and gasket
check
Brake fl uid level check
Reverse gear buzzer operation
check
Diesel engine start-up safety
system check
(6)
Tyre pressure check
Dust panel check
Side broom check and
adjustment
Main broom check and
adjustment
Engine oil replacement (7)(8)
Parking brake check
Alternator belt tension check (7)
Climate control system
compressor belt tension check
(8)
Diesel engine oil fi lter
replacement
(7)(8)