Nilfisk-Advance America SR 1800S 2WD - Manual (Page 57)

USER MANUAL ENGLISH
SR 1800S D 2WD 33014097(2)2006-12 A 3
INTRODUCTION
NOTE
The numbers in brackets refer to the components
shown in Machine Description chapter.
MANUAL PURPOSE AND CONTENTS
The purpose of this Manual is to provide the operator with all
necessary information to use the machine properly, in a safe
and autonomous way. It contains information about technical
data, safety, operation, storage, maintenance, spare parts and
disposal.
Before carrying out any procedure on the machine, the
operators and qualifi ed technicians must read this Manual
carefully. Contact Nilfi sk-Advance in case of doubts
concerning the interpretation of the instructions and for any
further information.
TARGET
This Manual is intended for operators and technicians
qualifi ed to perform the machine maintenance.
The operators must not perform procedures reserved for
qualifi ed technicians. Nilfi sk-Advance will not be responsible
for damages coming from failure to follow these instructions.
HOW TO KEEP THIS MANUAL
The User Manual must be kept near the machine, inside an
adequate case, away from liquids and other substances that
can cause damage to it.
DECLARATION OF CONFORMITY
The EC Declaration of Conformity (Fig. A), supplied with the
machine, certifi es the machine conformity with the law in
force.
NOTE
One copy of the original EC Declaration of
Conformity is provided together with the machine
documentation.
NOTE
If the machine is approved to be used on public
roads, the machine is supplied with a special
Certifi cation of Conformity.
IDENTIFICATION DATA
The machine model and serial number are marked on the
plate (1, Fig. E).
The machine model year is written in the EC Declaration of
Conformity and it is also indicated by the fi rst two fi gures of
the machine serial number.
This information is useful when requiring machine spare
parts. Use the following table to write down the machine
identifi cation data.
MACHINE model .................................................................
MACHINE serial number .....................................................
CAUTION!
The machine serial number is also printed on
the machine frame (2, Fig. D).
OTHER REFERENCE MANUALS
Spare Parts List (supplied with the machine): 33015056
Service Manual (that can be consulted at Nilfi sk-Advance
Service Centers): 33015626
SPARE PARTS AND MAINTENANCE
All necessary operating, maintenance and repair procedures
must be performed by qualifi ed personnel or by Nilfi sk-
Advance Service Centers. Only original spare parts and
accessories must be used.
Call Nilfi sk-Advance for service or to order spare parts and
accessories, specifying the machine model and serial number.
CHANGES AND IMPROVEMENTS
Nilfi sk-Advance constantly improves its products and reserves
the right to make changes and improvements at its discretion
without being obliged to apply such benefi ts to the machines
that were previously sold.
Any change and/or addition of accessory must be approved
and performed by Nilfi sk-Advance.
–
–