Setting your destination – Navman SmartST Professional User Manual

Page 25

Navman

SmartS™

Professional for Palm

Setting Your Destination

Before you travel, you must fi rst select a destination and allow SmartS Professional to plan your route. There are three

main ways that you can program your destination:

• Use

QUICK NAV

that you have previously programmed for destinations used on a regular basis.

•

Set a new DESTINATION using one of the following methods:
-

enter a specifi c street address;

select the intersection of two streets;

choose a Point of Interest such as a hotel, school or hospital;

use a Favorite destination that you have stored already;

pick an address you have recently travelled to.

•

Take a position straight from the map and program this as your destination.

9-1 Using a Quick Nav

You are able to save your three most frequently used destinations as Quick
Navs. This is the quickest and easiest way to set your route.
1 From

the

MAIN MENU

, select QUICK NAV.

Select your previously programmed destination from the Quick Nav
list.

3 SmartS Professional will calculate the route from your current

position, and take you straight to the Navigation Screen.

For information on programming new Quick Navs, refer to Section 11-3
Quick Navs.