Navman SmartST Professional - Manual (Page 21)

21 Navman SmartS™ Professional for Palm OS ® 5
2 For Serial GPS Receivers:
• From
the MAIN MENU , select SETUP.
• From the drop down list, select GPS.
• From the Port options, select SERIAL.
• Refer to the instructions supplied with your GPS Receiver to
select the Baud Rate.
7-4 Switching On the GPS Receiver
All GPS Receivers must be switched on via the SmartS Professional
software.
1 From
the MAIN MENU , tap on GPS STATUS.
2 Turn the GPS on by checking the "GPS On" box.
3 Return to the MAIN MENU.
Tip: It may take a few
minutes to obtain an
initial position fi x, but
will subsequently be
much quicker. Refer to
Section 7-5 Obtaining
a GPS Fix.
Sony Car Cradle
Users: Restricted
Function. Refer
Section 6-1.