beautypg.com

Dss/blf (direct station select, busy lamp field) – Nortel Networks i2022 Series User Manual

Page 51

background image

i

2022 ISDN Teleset

49

Off-Hook

--

The icon on the right is displayed when the Analog Port is programmed and the Analog Call Appearance is

off-hook.


HEADSET

– The Headset icon will light when the Handset/Headset option is in the Headset mode.


INTERCOM

-- Lights when Intercom is set to Auto Answer. It is not lit when the Intercom is the manual answer mode.


RINGER-OFF

-- Lights when the Ringer volume is set to off.

ALARM

-- Lights if the Alarm Clock is set.


DATA --

Lights if one of the B-Channels is in the Data Mode.

-- Lights with Screen Area flashing if Data is being transmitted or received.


DATA --

Lights if both of the B-Channels are in the Data Mode.

--

Lights with Screen Area flashing if Data is being transmitted or received.

DATA

-- The D-Channel is in the Data Mode.


AUX

-- Lights when any device other than the cordless phone is plugged into the AUX port.


EXTENDED COUNTER ON CLOCK

. Reserved for future use.

DSS/BLF (DIRECT STATION SELECT, BUSY LAMP FIELD)

DSS – This feature allows calls to be transferred to a station without dialing the station on the keypad.
BLF – For use by attendant consoles - When an incoming call rings the main number, an attendant can use this feature to

check the status of a line for a busy condition. If inactive, a call may then be transferred by using the DSS key.





NOTE: Only Non-PrimCA keys can be programmed as DSS keys. You must first change a PrimCA

key to a General CA key.