Nortel Networks i2022 Series - Manual (Page 30)

i 2022 ISDN Teleset
28
To return to Manual Answer, press the Manual Answer key.
Speed Dial Key Assignment
You can assign Speed Dial numbers to individual hardkeys. Programmable hardkeys may only be assigned to a single
function/feature. If a hardkey is already assigned, it cannot also be used for a Speed Dial key. This activity should be
coordinated with your system administrator or service provider.
1. Press MENU to bring up the menu shown below. When it appears press the SpDial key.
2. If a hardkey lights, it means that key is already assigned a Speed Dial number. Press the hardkey you wish to
program as a Speed Dial key. Each Speed Dial key will store 32 digits. The display will only show 24 digits of the
number. The complete number can be viewed by using the volume control key.
NOTE: If you select an unlit key that is not available, a Call Appearance for example, the display will show “
Another Key>”. After a few seconds the phone will select the first available key automatically. If this key is
satisfactory, proceed with the programming. If this key is not satisfactory, press the MORE key to abort the
selection. You will then be given the opportunity to select another key.