Nortel Networks i2022 Series - Manual (Page 49)

i 2022 ISDN Teleset
47
To configure the i2022 for Analog Port on a separate SPID, press MENU, MORE, MORE, Config, MORE, MORE, SPID,
SPID2
. The display will show
Press Change, and enter the second SPID. Then press Save. The display will then prompt for a service.
Pressing POTS will change the “Serviced as” line in the display to “Serviced as Voice and POTS”. Press MENU to save
and exit.
Analog Port on a Separate SPID – Operation
When the Analog Port is configured, the top line of the display will show the on-hook analog icon.
Incoming calls will ring on the Analog Port. Calling Line ID is available on the Analog port. The analog icon will indicate the
Analog Port ringing.
When the call is answered the CA1 LED on the i2022 will light, and the analog icon will show the Analog Port off-hook.
NOTE: changing or entering a SPID will cause the i2022 to reinitialize.
NOTE: SPID 1 and SPID 2 can not be the same number.