Nortel Networks i2022 Series - Manual (Page 39)

i 2022 ISDN Teleset
37
Conferencing an Outgoing Call to an Incoming Call
1. Place the outgoing call on Hold by using the Hold key.
2. The outgoing Call Appearance will flash red.
3. Answer the incoming call.
4. Press
the Conf (conference) softkey and the phone adds dial tone from another Call Appearance. Ignore the dial tone!
5. Press the first (outgoing) Call Appearance and the dial tone stops.
6. Press
the Join key and the conference is completed.
Conferencing Two Incoming Calls
1. Place the first incoming call on Hold – the first Call Appearance flashes red.
2. Answer the second incoming call.
3. Press
the Conf softkey. As above, ignore the dial tone you hear from another Call Appearance.
4. Press the first Call Appearance, then press Join - the conference is completed.
The Drop Feature
The Drop softkey will be available whenever the Teleset is off hook. The function of the Drop feature varies depending on
the call state.
When off hook to dial tone or a partially dialed number, or a ringing number, pressing the Drop key will disconnect the
current call and cause the i2022 to revert back to dial tone
When on an active single party (non-conferenced) call, pressing the Drop key will disconnect the current call and
cause the i2022 to revert back to dial tone
When on an active conference call and the controller of the conference, pressing the Drop key will disconnect the last
party added to the conference call. Subsequent pressings of the Drop key will disconnect the call and the i2022 will
revert back to dial tone.
When on an active conference call and NOT the controller of the conference, pressing the Drop key will disconnect
the current call and cause the i2022 to revert back to dial tone
TELESET FEATURES
REDIAL
Press this key to automatically dial the last manually dialed, or Speed Dialed number. This is especially handy when trying
to connect to a frequently busy number.
1. Go
Off-Hook.
2. When dial tone is received, press the REDIAL key. Pressing this key without going Off-Hook enables the
speakerphone. The last manually dialed number is dialed for you.
3. Go On-Hook when the call is completed.
DIRECTORY
The following characteristics apply to entries placed in the Directory:
A name may be up to 20 characters in length.
A Directory Number (DN) can be 32 digits long.
The directory capacity is 100 entries - stored in alphabetical order.
Search hint: If you forget the name you are looking for, press “Find/Next” and you can scroll through the entries.
NOTE: Some switches may have multiple drop keys. These drop keys, if available, will be found as one or more
of the Programmable Hardkeys.