3–way conferencing, Conferencing two outgoing calls, Conferencing an incoming call to an outgoing call – Nortel Networks i2022 Series User Manual

Page 38

2022 ISDN Teleset

3–Way Conferencing

Conferencing Two Outgoing Calls

1. Place the first call.
2. Press

the

Conf

or the Conf/Tr softkey, the phone automatically provides dial tone from another Call Appearance.

This display is shown after the second call is ringing.

3. Dial the number of the second party.
4. Press

the

Join

key to complete the conference.

The Conf key will always change to AdNext. If you only subscribe to 3-Way Conferencing, you cannot add any more to
the conference.

Conferencing an Incoming Call to an Outgoing Call

1. Answer the incoming call.
2. Press

Conf

and proceed as explained above.

NOTE: On the Nortel DMS-100

and Siemens EWSD

switches, the Conf key is displayed as Conf/Tr. On the

Lucent Technologies 5ESS

switch it is displayed as Conf and Trans keys.

NOTE: When you attempt to join a 4

party, you will receive a “Service Option Violated” message.

NOTE: You may press the Join key after the second party answers or while it is ringing.