NetComm IP DSLAM NCT480 - Manual (Page 98)

NCT480 IP DSLAM User Guide YML856 Rev3
8 www.netcomm.com.au
Local Console Connector Pin-Outs
RJ-45 connector on the NCT480 faceplate is use for Console management. A RJ-45 to DB-9 Female adaptor
is used to connect on PC’s COM port. Table A-4 lists the pin assignment between RJ-45 and DB-9 interface.
Figure A-3 RJ45 to DB- Adaptor
DB-9 DB-9 Signal RJ-45 signal RJ-45
1 2
2 TxD TxD 6
3 RxD RxD 5
4 DTE Ready DTE Ready 1
5 GND GNDF 4
6 DCE Ready DCE Ready 3
7 CTS CTS 7
8 RTS RTS 8
9
Table A-4 RJ45 to DB- Pint Assignment