NetComm IP DSLAM NCT480 - Manual (Page 40)

NCT480 IP DSLAM User Guide YML856 Rev3
40 www.netcomm.com.au
General Information
You can edit the system information in this dialog.
Figure -1 System General Information Dialog
Table 2-1 describes the general information dialog field items.
Item Description
System Description This is a text description of the entity.
System Up Time (hh:MM:SS) This shows the time in seconds since the system is up.
System Contact with us This specifies the textual identification of the contact person for this managed node,
together with the information on how to contact this person.
Valid values: String of up to 100 characters (‘A’ – ‘Z’, ‘a’ – ‘z’, ‘0’ – ‘9’, ‘-’, ‘_’) and any
combination of printable characters excluding ‘;’.
System administratively-
assigned name This specifies administrator-specific information.
Valid values: String of up to 100 characters (‘A’ – ‘Z’, ‘a’ – ‘z’, ‘0’ – ‘9’, ‘-’, ‘_’) and any
combination of printable characters excluding ‘;’.
System Location This specifies the physical location of this node.
Valid values: String of up to 100 characters (‘A’ – ‘Z’, ‘a’ – ‘z’, ‘0’ – ‘9’, ‘-’, ‘_’) and any
combination of printable characters excluding ‘;’.
System vendor Information This indicates the vendor-specific information.
Valid values: String of up to 100 characters (‘A’ – ‘Z’, ‘a’ – ‘z’, ‘0’ – ‘9’, ‘-’, ‘_’) and any
combination of printable characters excluding ‘;’.
hardware version This indicates the hardware and firmware information.
version of the control plane
software This indicates the software version of control plane.
DSP code version The Version number of Digital Signal Processor
Table -1 Modifying the System Information