NetComm IP DSLAM NCT480 - Manual (Page 59)

YML856 Rev3 NCT480 IP DSLAM User Guide NCT480 IP DSLAM User Guide
www.netcomm.com.au 5
DSL Profile Mapping
This section helps you to attach the DSL profile to the ADSL line interface.
Figure 4-4 DSL Profile Mapping Dialog
Table 4-4 shows the default parameter values if the DSL profile is ‘NONE’.
Item Description
from This specifies the starting ADSL port interface for ATM PVC configuration.
To This specifies the ending ADSL port interface for ATM PVC configuration.
Profile Name This specifies the profile name. (DSL Profile)
Table 4-3 DSL Profile Mapping
Item Setting
Line Interface
Standard type ADSL2Plus
AnnexM off
Line Type interleave
Rate Mode adaptAtStartup
SNR Margin (ATUC/ATUR)
Target SNR Margin (db/10) 60
Minimum SNR Margin (db/10) 0
Maximum SNR Margin (db/10) 310
Tx Rate and Delay (ATUC/ATUR)
Minimum Tx Rate (Kbps) 64
Maximum Tx Rate (Kbps) ATUC: 28000
ATUR: 1088