NetComm IP DSLAM NCT480 - Manual (Page 25)

YML856 Rev3 NCT480 IP DSLAM User Guide NCT480 IP DSLAM User Guide
www.netcomm.com.au 5
Connecting a Console
Complete the following steps to connect the NCT480 Console management.
1 Connect the RJ-45 to DB-9 adapter cable to the Console port on the NCT480.
2 Connect the other end (female) to the computer’s COM port.
Figure 4- RJ-45 to DB--female Adapter cable for Console Management
Figure 4-3 NCT480 Console Port Management Cabling
Configure the PC’s COM port
Use your terminal emulation program (such as HyperTerminal in Windows) to set your COM protocol to the
following settings:
Parameter Setting
Baud rate 9600
Data bits 8
Parity None
Start bits 1
Stop bits 1
flow control None
Table 4- NCT480 Console Management Setting