Navman N-Series - Manual (Page 17)

N-Series
User Manual
17
How do I get started?
Before you begin, check if your vehicle is fitted with a heat-reflective or heated windshield. If so, you
will need to purchase an external antenna for your Navman to receive GPS signals. For more
information, see the GPS Frequently Asked Questions guide.
To get started for the first time, complete the following steps:
Step Action
1 Turn your Navman on.
2 Select your preferred language.
3 Read and accept the warning message.
4 View the Tutorial.
1. Turn the Navman on
WARNING NOTICE TO DRIVERS IN CALIFORNIA AND MINNESOTA:
State law prohibits drivers in California and Minnesota from mounting objects on their windshields while driving. Other
Navman mounting options are recommended and an alternative mounting option is included in this box. Navman
does not take any responsibility for any fines, penalties, or damages that may be incurred as a result of disregarding
this notice.
See California Vehicle Code Section 26708(a); Minnesota Statutes 2005, Section 169.71.
a) Position the Navman in your vehicle according to the instructions in the In-Car Installation Guide.
Please ensure that:
ƒ the Navman does not obstruct the driver's view, or interfere with the operation of the vehicle
airbags and safety devices.
ƒ the battery switch is on (|).
b) Press to turn your Navman on.
The Navman will turn on and display the Language screen.
If your Navman was last turned off (o) via the battery switch, it will automatically turn on when the battery switch is
switched on (|).