Navman 5380 - Manual (Page 27)

TRACKER 5380 Installation and Operation Manual 27 NAVMAN
4 To insert a waypoint in the route:
i Select where the waypoint will be:
To insert the first waypoint in a new
route, select Leg 1.
To insert a waypoint at the end of
the route, select the unused leg at
the end of the list of waypoints.
Otherwise, select the waypoint to
insert the new waypoint in front of.
ii Press . A list of waypoints is
displayed. Select the waypoint to use.
As waypoints are inserted, the distance
and bearing of each leg is shown
automatically. If the route has more
waypoints than will fit on the display,
press or to see them.
5 To remove a waypoint from the route:
i Select the waypoint to remove.
ii Press and select Remove.
6 Repeat this process until the route is
finished.
7 Press .
8 Display the route on the chart (see section
6-2-3) and check that the route does not
cross land or dangerous water.
See section 3-1-3.
6-2-2 Editing a route
Editing a route from the chart
1 In the routes display, select the route to
edit. Press
and select Edit on
chart.
2 The selected route is displayed on the
chart, with a circle around the first
waypoint.
3 Edit the route as described in section 6-2-1
A, starting at step 4.
Editing a route from the routes display
1 In the routes display, press or to
highlight the route to edit. Press
and select Edit.
2 The selected route is displayed: the route
name and a list of the waypoints.
3 Edit the route as described in section 6-2-1
B, starting at step 3.
6-2-3 Displaying a route on the chart
To view the selected route at the centre of
the display:
1 In the routes display, press or to
highlight the route to display. Press
and select Display.
Or, in the Chart display, press , select
Find, then select Route. Select a route
from the list.
2 The TRACKER displays the selected route on
the chart.
1 In the routes display, press and select Delete all.
2 Select Yes to confirm.
1 In the routes display, press or to highlight the route to delete. Press and select
Delete.
2 Select Yes to confirm.
6-2-4 Deleting a route
6-2-5 Deleting all routes
6-2-6 Navigating a route
See section 3-1-3.