Nokia M1112 - Manual (Page 90)

Managing M1112
E Copyright Nokia Networks Oy C33907001SE_00 5-55
Vbridge commands
Command Switch on/off IP function in vbridge
Description Switches on/off IP function.
Syntax [no] ip address
Arguments no switches off IP function.
ip-address is the IP address of the Vbridge in dotted
decimal notation.
ip-mask is the subnet mask in dotted decimal nota-
tion.
Example
M1112(conf-vbridge)#ip address nnn.nnn.nnn.nnn
255.255.255.0
M1112(conf-vbridge)#
Command Switch on/off RIP receive function in vbridge
Description Switches on/off RIP receive function. When enabled,
M1112 receives Routing Information Protocol mess-
ages from other routers.
Syntax [no] ip rip-receive {rip-receive-mode}
Arguments no switches RIP receive function off.
v1 receive-mode selects RIP version 1.
v2 receive-mode selects RIP version 2.
both-v1v2 receive-mode selects both RIP version 1
and version 2.
Example
M1112(conf-vbridge)#ip rip-receive v1
M1112(conf-vbridge)#
Command Disable/enable management through the vbridge
Description Enables/disables the management of M1112 through
the vbridge.
Syntax [no] ip admin-disabled
Arguments no enables management through the ATM channel.
Example
M1112(conf-vbridge)#ip admin-disabled
M1112(conf-vbridge)#