Nokia M1112 - Manual (Page 28)

Interfaces and indicator lights
E Copyright Nokia Networks Oy C33907001SE_00 3-3
PIN Signal
3 DSL1
4 DSL2
Table 3-2 ADSL interface pin-out numbering
3.2 Command line interface
The command line interface (CLI) is RS-232 interface with an RJ-45
mechanical connector. The pin-out numbering is shown in Table 3-3.
1 8
Figure 3-4 CLI connector
PIN Signal Direction
M5112-ter-
minal
MDI signal
1 107 DSR
(const. ON)
–> Data set ready
2 108 DTR <– Data terminal ready
3 109 DCD
(const. ON)
–> Data channel re-
ceived line signal de-
tector
4 102 SG Signal ground
5 103 TxD <– Transmitted data
6 104 RxD –> Received data
7 105 RTS
(not in use)
<– Request to send
8 106 CTS
(const. ON)
–> Clear to send
Table 3-3 Command line interface pin-out numbering