Nokia M1112 - Manual (Page 71)

M1112 Administrator Manual
E Copyright Nokia Networks Oy C33907001SE_00 5-36
Command Show startup configuration
Description Displays the startup configuration of your M1112. This
is the configuration saved in the startup.cfg file. Star-
tup.cfg file is activated when M1112 is switched on. If
the startup.cfg file is missing, the default configuration
is used.
Syntax show config startup
Arguments None
Example
M1112> show config startup
system
hostname M1112
eth
ip address 192.168.172.148
255.255.255.128
vcc1
pvc 0 155 tunneled-ppp-vc
bridging
vbridge
mngtvcc
common
M1112>
Command Show default configuration
Description Displays the default configuration of M1112. M1112
uses this configuration if the startup.cfg file is missing.
Syntax show config default
Arguments None
Example
M1112> show config default
system
hostname Mxx
eth
bridging
vcc1
pvc 0 100 eth-llc
bridging
vbridge
mngtvcc
common
M1112>