Nokia M1112 - Manual (Page 84)

Managing M1112
E Copyright Nokia Networks Oy C33907001SE_00 5-49
Command Switch on/off RIP receive function in Ethernet inter-
face
Description Switches on/off RIP send function. When enabled
M1112 receives Routing Information Protocol mess-
ages from other routers.
Syntax [no] ip rip-receive {rip-receive-mode}
Arguments no switches RIP receive function off.
v1 receive-mode selects RIP version 1.
v2 receive-mode selects RIP version 2.
both-v1v2 receive-mode selects both RIP version 1
and version 2.
Example
M1112(conf-eth)#ip rip-receive v1
M1112(conf-eth)#
Command Disable/enable management through the Ethernet
interface
Description Enables/disables the management of M1112 through
the Ethernet interface.
Syntax [no] ip admin-disabled
Arguments no enables management through the Ethernet inter-
face.
Example
M1112(conf-eth)#ip admin-disabled
M1112(conf-eth)#