Nokia M1112 - Manual (Page 72)

Managing M1112
E Copyright Nokia Networks Oy C33907001SE_00 5-37
Command Show configuration file
Description Displays the local configuration file
Syntax show config file
Arguments filename is the name of the local configuration file.
Example
M1112> show config file startup.cfg
M1112>
Command Show debug status
Description Displays the status (ON/OFF) of the debug functions.
Syntax show debug
Arguments None.
Example
M1112> show debug
log
OFF dsl OFF
eth OFF atm-aal0 OFF
atm-aal5 OFF ppp OFF
pptp OFF arp OFF
ip-host OFF ip-forward OFF
ip-icmp OFF napt-map OFF
napt-entry OFF napt-internal OFF
napt-h323 OFF dhcp OFF
dns OFF
M1112>
Command Ping
Description Send an ICMP echo request to an IP address to test
the IP function.
Syntax ping
Arguments ip-address is the IP address of the ping destination
in dotted decimal format.
Example
M1112> ping 198.168.172.23
Reply from 198.168.172.23: bytes 32 time <10ms
TTL=128
M1112>