Nokia M1112 - Manual (Page 78)

Managing M1112
E Copyright Nokia Networks Oy C33907001SE_00 5-43
Command Reset subsystem
Description Resets subsystems.
Syntax reset {log | dsl | ppp [vcc-id] | arp | bridge | napt}
Arguments log resets the diagnostic log subsystem.
dsl resets the DSL subsystem. The DSL connection
will be re-established.
ppp resets the whole PPP subsystem. The PPP con-
nection will be re-establihed. If you provide a VCC
number (
vcc-id ), only that connection will be reseted.
arp clears the ARP table.
bridge clears the bridge table.
napt resets the NAPT subsystem.
Example
M1112> reset bridge
M1112>
Command Logout
Description Logs out from the command line interface.
Syntax logout
Arguments None
Example
M1112>logout
Command Fast restart M1112
Description Restarts M1112 software.
Syntax reload
Arguments None
Example
M1112>reload
in progress...