NetComm G.SHDSL 4-port Security Modem Routers NB712 - Manual (Page 79)

NB712 / NB714 User Guide 79
YML829 Rev1
VPI: 0
VCI: 32
AAL5 Encap: LLC
Protocol: IPoA , EoA , IPoA + NAT or EoA + NAT
Note: The Protocol used in CO and CPE have to be the same.
Click Next to setup the IP parameters.
Refer to the section NAT/DMZ for more information.
IP Address: 192.168.30.2
Subnet mask: 255.255.255.0
Gateway: 192.168.30.1
Click Next
The screen will display the parameters that will be written to EPROM. Check the parameters and click the Restart
button to restart the router with the new parameters or press continue to setup other parameters.