NetComm G.SHDSL 4-port Security Modem Routers NB712 - Manual (Page 18)

18 NB712 / NB714 User Guide
YML829 Rev1
PPPoE
Step 5: Install the SHDSL Router
Do not turn on the Modem Router until you have completed the Hardware Installation.
• Connect the power adapter to the port labelled DC-IN on the rear panel of the product.
• Connect the Ethernet cable to the PC.
Note: The 4-port modem router supports auto-MDIX switching, so both straight and
cross-over Ethernet cables can be used.
• Connect the phone cable to the product and the other side of the phone cable to the wall jack.
• Connect the power adapter to the power source.
• Turn on the PC which will be used to configure the Router.
4-port router with network topology
Internet
Firewall
NB714 or NB712
G.SHDSL Modem Router
(Note: NB714 model shown)
PC PC PC PC