NetComm G.SHDSL 4-port Security Modem Routers NB712 - Manual (Page 59)

NB712 / NB714 User Guide 59
YML829 Rev1
9.1 Security
For system security, it is suggested that the default user name and password is changed
from the default.
There are three ways to configure the route: Web browser, telnet and serial console.
Press Security to setup the parameters.
For greater security, define the Supervisor ID and password for the gateway. If you don’t
set them, all users on your network will be able to access the gateway.
You can authorize up to five users to access the router via telnet or console. There are
two UI modes, menu driven mode and command mode to configure the router.