NetComm G.SHDSL 4-port Security Modem Routers NB712 - Manual (Page 109)

NB712 / NB714 User Guide 109
YML829 Rev1
14.16.16 IPQoS
IP QoS is a function to decide the priorities of setting IPs to transfer packets under the situation of overloading
bandwidth.
To configure IP QoS function, move the cursor to IPQoS and press enter.
>> Active Trigger IP QoS function
Add Add IP QoS policy
Delete Delete IP QoS policy
Modify Modify IP QoS policy
list Show IP QoS policy table
You can enable the IPQoS function via active command.
The add parameters of IPQoS can be configured via add command
>> Protocol Configure protocol
local_ip Configure local IP parameter
remote_ip Configure remote IP parameter
Port Configure port parameter
description Policy description
Enable Enable the policy
Precedence Configure precedence parameter
The port type is configured by protocol command.
The local ip range is configured by local_ip command.
The remote ip range is configured by remote_ip command.
The port range is configured by port command.
To define the description of policy is configured by description command.
To enable the policy is configured by enable command.
To define the priority of the policy is configured by precedence command
To delete the policy is configured by delete command.
To modify the policy is configured by modify command.
You can view the IPQoS configuration via list command.